Cost information for the following is not included. Normally this is because the quantity or ingredient is unknown
visual inspection machine
In Inductor’s world, it introduces the manufacturing process of inductors in two types.
Wire-winding type
1.Core manufacturing – After the process of creating the fine particles, molding, and firing, electrodes are formed on the manufactured core (magnetic core).
2.Wire-winding – A wire is wound around the core, and then terminals of the wire are connected to the core.
3.Frame processing – The wire-wound core is sandwiched by the frame.
4.Molding – Resin is poured over the coil sandwiched by the frame.
5.Terminal treatment – The resin-covered coil is separated, and the frame is bent to form electrodes.
Multilayer type
Paste forming – Ferrite powder and resin are mixed to form ferrite paste.
Sheet forming and printing – The ferrite paste is flattened into a sheet form, and electrodes are printed on it.
Multilayer process – Electrode-printed ferrite sheets are stacked in layers and pressed.
Suggestions?